Almost ready to dig. Willis Texas
- Thread starter thomasandanita
- Start date
jtburf
0
Looks good, I doubt they will start the dig now until Monday, this rain is looking like it will last longer than expected.
As Kim will say, expect mud!!
Best of luck,
John
As Kim will say, expect mud!!
Best of luck,
John
Well, dig started last Saturday. Installed the pool Monday. Begin to fill with water and I discovered a crack in the fiberglass in the spa seat. Waiting to see what the solution is.
Here are some pictures. The dogs finally got to inspect it. lol
Here are some pictures. The dogs finally got to inspect it. lol
Attachments
- Jun 22, 2014
- 52,066
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Not the way you like to see a project start.
But it's good you caught it when you did. 
They definately need to make it right. I doubt they will want to pull the shell and replace, but you never know. FB is quite durable, so a repair/patching job might be recommended although a bit noticable. At least in the spa the water weight isn't as much as if the crack was in the pool deep end or something. Still, curious to see how it turns out.
jtburf
0
Good luck, who is doing the Install Ricardo and Lalo?
Let me know the outcome of the crack issue.
John
Let me know the outcome of the crack issue.
John
yes, ricardo and lalo.
im sure the crack is repairable, just not sure that everything will match.
Update, pool is finally circulating. Electrical 95% completed. Just need to wire in the blower switch. Need to do final gas connections at the meter and heater still also. Concrete next week sometime. Electrician insisted on working during the rain Friday.
Attachments
jtburf
0
- Jun 22, 2014
- 52,066
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Similar threads
