Recent content by Stangfire

  1. S

    Electrical experts. How to wire my pump to stay on?

    Mines not exactly the same as that. Mine is model 8111. I can override the timer with the on/off switch to keep just the pump on temporary for the day. But I have to set the timer every day to activate the salt. I was hoping to keep the timer going for the salt and the pump runs 24/7. So I...
  2. S

    Electrical experts. How to wire my pump to stay on?

    This is my second summer with the pool. Exact same setup. I had no major issues last year only filtering 3 hours per day. I was actually very impressed on how easy the salt system is to use. I had clear water all summer but alot of debris on the bottom I had to vacuum once a week. I just...
  3. S

    How much salt do I need?

    Thanks, I'll pick one of those test kits up. I have the strips and found them terrible to read.
  4. S

    How much salt do I need?

    Thanks. I added my info in my signature. I put about 115 lbs in yesterday. I’ll have to test it. Maybe I put a little too much.
  5. S

    How much salt do I need?

    I just filled my 15' x 48" Steel frame above ground pool. I filled it from empty with well water. So current salt level should be zero. The pool is 16,015 Litres (4230 USG). How many pounds of salt do I need? All the charts I find don't go that low of gallons.
  6. S

    Electrical experts. How to wire my pump to stay on?

    I have an Intex model 8111 unit for my 15' above ground pool. It's the filter, pump and salt water generator in one. For my size of pool you set the timer for the SWG to 3 hours per day. That's the only time the filter pump will stay on is the 3 hours. Otherwise it is not running for 21...
  7. IMG_1439.jpg

    IMG_1439.jpg

  8. IMG_1438.jpg

    IMG_1438.jpg

  9. IMG_1437.jpg

    IMG_1437.jpg

  10. IMG_1436.jpg

    IMG_1436.jpg

  11. IMG_1435.jpg

    IMG_1435.jpg

  12. IMG_1425.PNG

    IMG_1425.PNG

  13. S

    Intex Model 8111 SWG not pumping.

    It might have a capacitor. I'm reading up on it. I'll check some more stuff tonight. It just hums when you turn it on. No pumping.
  14. S

    Intex Model 8111 SWG not pumping.

    Hi, I have a Intex model 8111. It’s the filter pump and SWG all in one unit. I just hooked it up yesterday. I turned it on and the pump is not pumping water. The green pump light is on and it’s humming but not pumping/flowing. I have water going to it. I bleed the air out. What can I check?
  15. S

    How to add a solar heater?

    You set the timer for how long you need it to generate based on your size of pool. In my case it's 3 hours. So every 24 hours it will run for 3 hours and that's it. I googled it and there might be a hack to rewire it so the filter pump will stay on 24/7. I'll have to read more about that.