Recent content by srikantheee84

It is very clear. I was wondering I need to increase my calcium hardness and cya.

I have 27,000 gallons salt pool. Here is my TF100 test results: Water Temp: 85 FC: 3 CC: 0 PH: 7.7 CH: 200 TA: 90 CYA: 50 Salt: 3500 What is your thoughts ? Do I need change anything ? Thanks!

Oh no. This salt cell is less than six month old :-(

It pops when salt cell is connected.

@Jimrahbe I unplugged the salt cell from the intellicenter and CB didn’t pop as well as I do see lights on the surge board. Something wrong with salt cell ?

@Jimrahbe I got new surge board today and replaced both surge board and CB but still did not work, again the CB popped. Any thoughts?

@Jimrahbe and @ajw22 I got new CB today, after connecting and turning the power, it popped. This confirm that it is bad surge board. I’m surprised as this was installed like six months ago. Is it worth going after Pentair warranty or just order new board myself ? Any reliable website where I can...

Thanks. Ordered new CB but not sure how to test it using car fuse though.

I removed entire breaker and then I was able to reset. Now it is not tripping but no power to the salt cell as well. Two ac inputs to surge board is giving me 3 volt which should be close to 30 volt(one input from the transformer and another from the CB)

I say that because I can’t reset my circuit breaker.

Do you mean circuit breaker ? If so, any recommendations where I can order them ?

Sorry, I was testing output from the transformer and output going from CB. The output of the transformer is 31v before going to the CB. Looks like bad CB ? 🤔

I was getting 3v going to the surge card

Yeah. That’s some internal mechanics of salt cell I learned today :-) Removed one of the AC wire from the surge card and another AC wire is connected permanently. It still pops the breaker.