Recent content by s.hashemirud

  1. S

    Superflo pump losing prime on low speed

    The company came over and checked and sealed some pipes. We do not have any valve except the backwash valve. The recirculating on filter made a big difference. I don’t know if the backwash valve on backwash pipe has any effect Because it has air leaks, but the filter was on filtering not...
  2. S

    Superflo pump losing prime on low speed

    No, we ran the pump for 24 hours during colder months like April, the program was 21 hour on 1400 and 3 hours on 2500, it was losing prime after some days of working. You could see there was no flow in return jets, but the pump never was dry. It was a big amount of air on top of the water. We...
  3. S

    Superflo pump losing prime on low speed

    Before recirculating, we had air leak on 2200 rpm too. But now there is air on top of the pump as big as a small lentil, but the problem is on lower speeds. I do not think before was normal, but I was hoping the new situation is normal and by replacing the filter, we solve the issue somehow! Is...
  4. S

    Superflo pump losing prime on low speed

    Hello all, Since the pump was losing prime, I asked the pool company who installed to come and check. They did check and said you have air leak. The air bubbles are only in the pump not return jets! I believe we are not losing water due to any leak because the amount of water that we are losing...
  5. IMG_3171.jpeg

    IMG_3171.jpeg

  6. IMG_3167.jpeg

    IMG_3167.jpeg

  7. S

    Superflo pump losing prime on low speed

    It is 6 months that we installed it. A pool company did. I reprogrammed for 12 hours and I will give you an update soon
  8. S

    Superflo pump losing prime on low speed

    I forgot to tell you that in the past when I tried to program it for less than 24 hours, it would work and turn off but would not turn on the next day. I needed to turn it on by myself. How can I fix it? 🙏🏿
  9. S

    Superflo pump losing prime on low speed

    Do you mean higher than 2200?
  10. S

    Superflo pump losing prime on low speed

    To add to what I said, the pump works and you can hear it all the time but after some days the flow gets to zero in low speed
  11. S

    Superflo pump losing prime on low speed

    Thank you so much for the advice! We decided to run it with 2200 for 6 hours and 1500 for the rest of the day, but it loses prime on low speed after some days. After a week, the flow for 1500 is almost zero. I meant I barely would notice any flow
  12. S

    Superflo pump losing prime on low speed

    hello all, The pump has been installed in November and was working fine till Feb. now, it is okay when restart it but loses prime over time. We did backwash, but after some days still loses prime. We have replaced our deck drains recently then there might be some soil/ dust in the water; I...
  13. S

    Coat for resurfacing deck

    The quotes for pavers is about 45-50k and it is not only about the cost. We think removing and replacing at least takes a month and it is going to be a lot stress since they might break pipes and …. We thought maybe some coats would work easier
  14. IMG_1220.jpeg

    IMG_1220.jpeg