Recent content by Quinten

Perfect, thanks

One last question (yeah right) on the bonding, the panel documentation shows a dotted line for bonding on the ground bus bar with the line going to both the neutral bus and the ground bus. I was going to remove the bonding wire that is connected to the bonding lug on the pump and connect a new...

Yes I just found that... Was looking for a picture... lol

I wanted to verify the power jumpers but not sure what need to be unscrewed? I would think there would be some documentation on this rather than just start removing screws??? Plenty of pictures showing the jumpers but nothing on gaining access to them!

Ok, I see... Wasn't thinking about the wire to the pump, that isn't 10 awg so 20 amp gfci it is. Thanks for being patient with me!

I was going to put the GFCI in the pool breaker box running just the pump, then add a second 20 amp 240v CB for the solar controller and the clock running the SWG off the clock at 240v. I really don't want to take the solar controller apart to change to 120v since with my luck, things will...

Well for $100 less wouldn't this work since there is10 awg wire and a 30amp house breaker? I did find a 20amp at Home Depot but no "AP" designation. It shows class A on the label, is that what the "A" stands for? Just don't see any reason to spend that much for the pentair which seems to just...

Ok, thanks... I'll see if I can get a better shot of the wire coming into the box and remove the bonding wire from the ground block. Not sure when that was done but either when the pool was built or the pump replaced which I'm guessing the later as that is how the pump got wired to the existing...

I do have another question. Having difficulty locating a Siemens QF220AP, but did find a 30 amp QF230AP. I checked the house breaker and the pool circuit there is 30 amp. I can't tell the wire size at the pool end, but it looks to be 10 gauge, here are some pictures of the house CB and the...