Recent content by Pperc

For future members with the same problem: Problem fixed by replacing the battery.

Hi all, My iAquaLink 2.0 set up is losing time throughout the day. This seemed to start after some storms and power outages occurred. Could this be due to a failing CR2032 battery? Should I just replace that and see if it keeps time? Or is this something else? I think I know how to remove the...

Installed and everything is working properly with the impeller and it passed all checks, at least outside of the pool. We don’t open for a few more months. Hope I get another year or two.

Thanks, Jim. That makes sense. Fingers crossed.

Hi all, Like most of you, my Marina P&S Warrior SI’s impeller motor died after a little over 2 years out of warranty. I decided that I would purchase a new motor unit to get a few more years out of it before replacing. To my shock, most of the online parts companies I normally purchase from...

Update 10/22/21 Success! Purchased a true OEM 4 wire flow sensor instead of the cheaper after market part I got from Amazon. Installed with 4 wire set up. Added 3 bags of salt and tested 2 methods. General agreement of 3600ppm with 1766 and the LaMotte Tracer at 3700ppm. Fired the pump up…...

True. But the cell was giving me a 99+F water temp reading so I know there was an issue with the thermistor. Couldn’t just be the salt. I’ve done 3 things: 1. Bought that salt meter 2. Added 3 bags of salt to the pool today (should get me up to 3800-3900 based on 1766) 3. Ordered a genuine...

Thanks, purchased the LaMotte

8/6/2019 so nope :(

In 2019 from Amazon I don’t know of any other reliable methods

Should there be any issue with just twisting the wires together?

And what other reliable methods for testing salt are there other than the 1766? That was gold standard I thought?