iAquaLink 2.0 losing hours throughout the day

[Pperc]

Hi all,

My iAquaLink 2.0 set up is losing time throughout the day. This seemed to start after some storms and power outages occurred. Could this be due to a failing CR2032 battery? Should I just replace that and see if it keeps time? Or is this something else? I think I know how to remove the board and replace the battery, but just double checking that this is the likely culprit before going through the trouble. The upgraded board itself is only a few years old as I had it installed maybe 2 summers ago.

Thanks.

 

[PoolGate]

It certainly wouldn't hurt!

 

[Pperc]

For future members with the same problem: Problem fixed by replacing the battery.

 

[Pperc]

Quick update: this has happened again after several storms and power outages. Unfortunately, replacing the battery has not fixed the issue this time. Not sure what’s going on…

 

[Pperc]

Well, a full reset by turning the breakers off and then on has fixed it.