Recent content by Paul.Smith

Will I have to drain the water below the light to remove the ring? The section of the pool is only 2 feet deep which only leaves about 4 inches under the light. Can the water level be safely lowered to that level for a short period of time to repair the liner under the retaining ring?

What is the best way to fix a leak around a light in a IG vinyl liner pool? The liner has pulled away from the light retaining ring in two places. The result is two holes about a 1/4"in diameter. I don't think a vinyl patch would work because it would have to over lap on top of the retaining...

I finally figured out all the plumbing that is on the pad next to the pool. I ended up lowering the levels in the pools and hooking up a leaf blower to each pipe. It looks like there were two separate systems installed. One for the lower pool and one for the upper pool. Upper pool (16000gal)...

The length of the infinity edge is about 20 foot. The slide is an Inter-fab whitewater Part #WWS-CRG-SS. Still trying to get in touch with the person who helped install the pool. The original owner of the house owned a pool store here in town and this guy used to work for him. I have no...

No I do not have solar. The green pump needs serious help. It had a cover left off and is corroded badly inside it. It was a 2hp pump that was hooked into the pool system. The distance is about 10 feet from the pad to the pool. No I do not know. I do have contact info...

Thanks for img code tip. Hopefully when I get it working I will be able to post sparkling clean pictures of it. Yes we do have the tiles for it. There were about 9 extra boxes of tiles in the garage when we moved in.

I've been lurking for a while and finally decided to post and ask some questions. We just purchased our first home last October. The home had an infinity pool but needs some work. The home was empty for almost 2 years. The previous owner removed the filter and pump control system. So I'm...