Recent content by Mtdorris

Anyone have any experience replacing the temperature sensor? how to remove old one without dropping inside PVC pipe (seems to be glued to PVC pipe with PVC Cement. Is it supposed to be installed that way? I would hate to replace the entire piping if I can drill it out or extract another way...

Do you know which relay? K12 far left relay? It seems to work fine after circuit breaker stays off for a while and restarted. Then it runs fine according to time clock for about one hour then turns on and off continuously or runs continuously. How are the relays attached to the circuit board...

It is definitely related to the temperature sensor. I disconnected the sensor and it ran correctly for a few hours then ran continuously again. Today I reconnected the temperature sensor and it turned off correctly as soon as it was reconnected. But after a few hours again it started running...

Ok, located temperature sensor in wiring diagram, will try to locate physically tomorrow and warm it up to see if it is causing the problem; can it simply be unplugged also? Sent from my iPad using Tapatalk

Not sure where is temperature sensor? Sent from my iPhone using Tapatalk

Some additional information: timer worked correctly for a short time (few hours) after resetting circuit breaker, then would not turn off again running continuously until the line power was turned off again. Seems as though a relay or something is tripping to bypass / override the timer...

Timer just stopped working 3 days ago and began running continuously. I figured the timer was bad but after replacing no change. Sent from my iPhone using Tapatalk

It's a lennovator pool and spa control system. LG Base PCB PN: 02-2525-P0. Timer is in middle position to run on the clock dip switches, but even if unplugged still runs unless I trip the breaker switch. Wires all seems correct, it is as if the timer is being bypassed or overridden by...

Pool pump runs continuously, replaced grasslin 24hr timer Fm1stuzh but it seems the timer is bring overridden. How to reset or make timer work again? Sent from my iPhone using Tapatalk