Recent content by MikeLikesPools

  1. M

    thank you for your help!

    I just got finished installing my circupool rj-60+ Im so stoked. With my properly balanced bool along w/ my tfp kit/supplies and the knowledge here Ive become quite the pool expert lol. I finally reached 3500 salinty (slowly adding salt over time over the last week being careful not to over do...
  2. 40CF0174-9B0D-4F04-9796-2336EF68B43D.jpeg

    40CF0174-9B0D-4F04-9796-2336EF68B43D.jpeg

  3. 89F4BC1D-4790-42EF-B48C-149811424CEA.jpeg

    89F4BC1D-4790-42EF-B48C-149811424CEA.jpeg

  4. M

    circupool rj-60+ install location

    Can I go out the filter then straight up rather than the tilt that was done? I was thinking out the filter straight up and install saltwater generator inline vertically there then go across to the jandy? One other question, my aux pump for my polaris has a removable connector hose for easy...
  5. M

    circupool rj-60+ install location

    Im not trying to replumb everything, Ive attached where i think would be a place I could install with vertical install kit. I marked the site with a yellow line, the other pipe is a water fall I dont run all the time due to algae. Thoughts?
  6. 3F881947-83C7-4ACA-B06E-50BC2A564038.jpeg

    3F881947-83C7-4ACA-B06E-50BC2A564038.jpeg

  7. 046414A3-5C0E-42C9-8599-FBFC928A61B6.jpeg

    046414A3-5C0E-42C9-8599-FBFC928A61B6.jpeg

  8. M

    filter pressure issue after introducing slower overnight RPM

    so I backwashed and recharged and we are back down to normal psi of 9/10psi. I will monitor tonight and tomorrow and see if the weird pressure issue comes back.
  9. M

    filter pressure issue after introducing slower overnight RPM

    thanks for the advice. I actually run my daytime at max for 6hours then the remaining 16 hours is 85% for 8 hours then I was using 50%. At 30-40%, due to the design, the pump I have, imho, has a poor design for the pump basket which relies on internal suction to secure basket. The original pump...
  10. M

    filter pressure issue after introducing slower overnight RPM

    k, will try it, I do get quite a bit of debris so it could be possible.
  11. M

    filter pressure issue after introducing slower overnight RPM

    Hey all, so to summarize my issues to date I thought my pressure issue with my pool filter was related to algae previously but it seems that is not the case? I fought off algae with yalls help (none visible but definitely was losing too much FC) and I SLAM'd for a few days a few weeks back and...
  12. M

    CYA and FC trade off in the TEXAS SUMMER HEAT

    Im at 50 and lost 2.5 during yesterday's "extreme UV". Once I solve my other problem I will probably bump mine to 60. I dont want to be out here every 24hours adding stuff. I also did overnight chlorine tests and no problems so Im certain its not algae. One thing you might want to do is make...
  13. M

    decking drain clog?

    my deck has two of these drain holes. I wanna try to clean them out (way too much pollen this year) but I cant seem to open them up any tips?