Recent content by mbeavers1

The acid output line is there (not connected in this pic cuz I was messing with it). It's where the gray check valve is located. It's not on the return line, it's on the discharge line from after the heater

Fingers crossed, I may have just gotten it. Think the white pump tubes I bought were not right. I had a second package with the PN matching the Pentair manual. These were slightly shorter than the one I put one. Maybe there was another PN. Anyway, it's dispensing acid again!

Pump is built into intellichem tank. Acid dispenses downstream of SWG and heater. Flow cell inlet is between filter outlet and heater inlet and flow cell outlet is between SWG and acid injection point. I cannot get any acid to come out of the tank but pump operating normally. I have...

Hi all I had an Intellichem system added when we built. I quickly learned the hassle of ORP and converted to salt, however, I like the ability to add acid. This year my system has stopped dispensing. I have changed the peristaltic tube, changed tubing, etc but cannot get it to pump acid...

Hi guys, I am trying to help a friend up in Canada get their pool issues sorted out. Unfortunately, they have definitely not been following the TFP methods. That said, they have a K2006C kit and a speed stir on the way so we can actually find out what's going on. Now on to what's happening...

Some is white, some has this blue stuff. It starts in the grout lines and runs down across the glass tiles. The tile is glass so I doubt the blue is coming from them. We have the efflourecense all the time but it was always white before.

We have a spillover hot tub with glass tile. We have always had white efflourecense coming from the grout, but now it is turning blue (see pics). Any ideas what is causing this?

Sooo...apparently I was going blind. Turns out only the breaker was flipped. Because of the clip tying the two poles together, it looked almost normal. Using my DMM, I could tell there was no power at all so just traced it back. Now, i was curious about that seal too. Seems its intact but...

Thanks! I did a bit of searching (should have done that first!). I do have a DMM and will tear into it tomorrow.

Hi, we have a 2hp Pentair fixed speed pump that runs our sheer descents. I noticed a week ago that the pump is no longer kicking on when scheduled. The pump has run for 3 years without issue and the control system shows it should be on (Intellicenter). No breakers are tripped. I do see...