Recent content by keene3b07

Yes the power to the intelliflo is controlled by the 20 minute timer. The pump is running when it gets power even though it is outside its schedule. There is no manual control of the pump happening. Think of the 20 minute switch as a breaker. I don’t have the model number off hand

I’ve got an intelliflo running spa jets. The jets are turned on by rotating a 20 minute switch. The customer wants the jets to not turn on after 10 pm. I set 1 schedule in the intelliflo from 8am-10pm. However when the switch is turned on after 10pm the jets still come on. Any ideas? The...

I am having a hard time figuring out how to wire an external stenner pump to the intellichem. This will be a chlorine only system. Any help would be appreiated! thanks

every jet does it though

I have a pool where the pressure rises about 20 psi when the return lines are on the spa. On most pools the pressure rises about 10 psi when the returns are on the spa. The other abnormality on this pool is that the jets in the spa will go in and out, there will be pressure on a jet and then...

yes that one

Okay so i dont have a picture of the control box but it only has three lights. pwr sensor and fillng. I can not pull the sensor up and out of the pipe, it gets stuck.

Ive got a 45 second video but its saying the file is to large for the server to process

OKay thanks. The trough is outside, and the sensor tube is inside the pump room. I would estimate that the sensor is located at about the same height as the trough.

I have a very small pool with an infinity edge that has a levolor autofill. The pool was recently drained and refilled. the trough was empty and so i stuck a hose in there to fill it up. After a few minutes i noticed that the trough wasnt filling up, i went over to the equipent and see water...

Where is that jumper? I am installing an intellicenter and the existing compool system used a 3 wire setup. Now nothing works

no iron in the water. I dont have before/after pics. The staining is a much lighter shade of blue than other areas of the surface

I had a customer have a valve acuator malfunction and there spa emptied overnight. He immediately filled it back up and noticed the spa was now very discolored. Any ideas on what would cause this?

Moved from here. Does anybody have a problem with more calcium flakes in the pool when the pool is covered the majority of the week?