Recent content by Kdart

Thanks for the advice!

My super pump strainer housing (SPX1600AA) was violated by a chipmunk and the drain plug inlet gasket seat is mauled/chewed. The inlet/outlet is 1.5". Apparently, this housing is no longer available as a replacement part, but a 2'x2" inlet/outlet is available from many supply houses. Does anyone...

My M400 stopped working. Dreaded Red Ring. Did recommended diagnostics and brushes would not turn. Dismantled and discovered the housing holding the drive gear sheared and locked down the motor. When I removed the broken pieces, bench testing works fine. See picture. Anyone have a fix solution...

I had a similar issue two winter seasons past. Worked fine until temps dropped too low. After deductive reasoning and only failing when temps dropped, I removed the cover of the actuator and discovered water had infiltrated the actuator and it would not operate as the inside was a block of ice...

Any updates with this post? I'm having the same issue as the remote is reporting the same message "not responding". No ability to "teach" either as that function is not available in the Settings Menu. Looking at the attached pic, my remote does not show any wireless signal being immitted. Time...

Got it! Unlocked and disabled. Thanks to all!

Thanks for the followup! The pool builder locked out that menu so I have to gain access and disable. Thanks again!

This is my first full year with a new pool. I live east of Atlanta and my second winter as the pool was finished January of this year. Freeze protection is set to 36 and has already been in play. This season I decided to remove the salt cell and replace with a dummy and move to chlorine tablets...

New to the forum and hoping to learn as much as possible. Installed a SWG, 18,000 gal pebble tec with spa and rock water feature. The articles have been extremely useful as the builder "pool school" was less than desirable. I wish I had know of this site prior to opening as I would have been...