Recent content by jwigginton

That makes sense - thanks Jim. I'll keep an eye on it and my chlorine levels and make a determination if/when to replace the Cell.

Jim, Thanks for the info. Interesting - so i did have it rewired back to normal, and the flow light was RED as usual and cell light OFF. I turned it up to 100, and the flow light turned GREEN and Cell light came on Green. This is a good thing, i think. So the flow light is just RED when the...

Hello, I have an IC40 and recently the FLOW light started turning on solid RED and does not go to green. I've done the following: 1. Cleaned the cells - still RED flow light 2. Cleaned filter basket 3. Removed the Pool cartridge filter to see if that could be impacting flow - still RED flow...

Thanks for the tip on the CSI. From playing with the numbers I do see if I can keep my TA low with a lower ph and some other items, I can get a negative CSI. It's currently at +0.58. I'm also thinking of just having the hose fill the pool and since I have an overflow it would slowly replace...

Thanks for the tips. I'm not sure how my FC got so low, I'm going to boost my SWG to 60%, it's been at 40% and I've been told to boost it once a month or every other month. I'll see if 60% makes a difference in the next week or so. Thanks for the tip on the MA on the white flakes to validate...

Hello, I'm new to the forum and just started testing the pool myself. I have been using the local pool stores for the past 4 months, but noticed some white flakes all over the bottom of the pool and so I order a K2006 Test kit to take things under control myself. The pool color is nice...