Recent content by davethomaspilot

Stenner says no, the pumps on Intellichem are integrated into the tank assembly.

I'd like to get a larger tank so when I'm out for a month in July, the chlorine won't get depleted. I'd like to get something where I can just remove the pump from the Intellichem tank and move it to the new tank. Based on the pump tube replacements I've purchased over the years, I'm thinking...

Finally got it off. Just kept working round the shaft applying lots of pressure. Finally it just popped off all at once. New roller assemble fixed the problem! Looks like they are over $60. I might be able to punch the shafts out of the assembly an replace the rollers with 3d printed ones...

Actually, it's the inside hole that has enlarged over time. There's a lot of wobble and that would explain why the roller might not pinch the tube as tight as it should. I forgot I had a spare--but so far I can't get the roller assembly off the pump shaft. It looks like it should just pull...

Process of elimination says it's gotta be the rollers. I'm not hooked to an injector and suction side is just inserted into a jug of acid. And, I can blow through the tube with no problem. Also, if I cover the other end when I blow, air doesn't escape, so there's no leak. Besides--same...

Not that, because same tubing, same everything except different pump. Reading the thread, thanks!

The pump motor runs and the rollers are squeezing the tube, but no acid is pumped. I thought I just needed a replacement pump tube--that's been the solution in the past. I put the same pump tube on the adjacent stenner pump (along with attached tubing) that's used to dose chlorine and it...

I need to move my Intellichem flow cell/probe holder. The rubber tubing the water in/out isn't long enough. Is it 3/8"? Can I get it locally at Lowe's?

These fit my tank mounted pumps. OEM Size C.

Thanks for that. There are some "pump tubes" on that list. After posting, I realized what I have is tank mounted pumps instead of what's show in the Intellichem manual. I'm not sure if they are the same. I'm going to ask the pump tube retailer to measure the length of what they offer and...

I need to order some new tubes for the chlorine pump in my Intellichem system. I can't read the P/N on the old tube. I've order the wrong ones in the past (they were too long), so I'm hoping someone can tell me which size is correct. Thanks!