Recent content by askinstuff

Have a 15x30 AGP. Had robot run 4 times. Does a good job within the straight edges of the pool, but almost non existant around the ovel areas. Tried starting it all over the pool, but same result! Sucks (no pun intended) to spend $700 and for it to work this poorly. It searching around, but...

another question, can you add chemicals to through the skimmer like you can with sand?

Just a quick update, I don't have the pool chemicals levels from last season. I haven't opened the pool yet this season. I had posted the question, because if I needed to change the sand, It would make most sense to do it before opening the pool. I did the deep cleaning that was posted. We'll...

its 5 years old zeo-clear. Pool chemistry was fine and could not get it clear. This included myself testing the water, as well as taking it to the a pool supply store to make sure. Tried using 10% water salt solution as well as zeosand cleaner, but no change. cant think of anything else

I have to replace mine and hadn't really thought about how to get rid of it? of if it was sand for that matter. I'd prefer not to start a pile of sand in the back yard! thx

Oops. Used Swype keyboard and didn't proofread lol

The liner is about 3 years old. Small slot about 1/2 in. Leak send VERY SLOW. only reason I even know about it is that one of my kids noticed it when swimming under water. What is the best way to patch it up. Haven't had anything like this and am pretty new to Pools in general. Thx

Will definitely put something down, just trying to figure out if should stay with carpet. If carpet, Abby idea what I should look for when buying one for this type of application?

I have a metal pool sidedeck that needs to have the carpet replaced. It's about 5x15 on an oval above ground pool deck, which is on the long side of the pool. Not sure of I should go with carpet or another material. I live in Western MA. What do you good recommend? Materials, cost, pros and...

Hi, just opened up my pool and realize that the pool timer was not turning the filter on and off. It visually looks fine, the trippers go to the switch but never actually TripIt. I can turn the electricity on and off manually without an issue. The gears behind the dial look fine. The timer wheel...

So I opened up my pool and the side deck, which is carpeted gray, has some staining on it. What's the best way to clean this? Recommended products? I'm assuming a limited amount of products would b ok to use since you gotta be careful with getting whatever you use getting in the pool. Thx

Filter and o ring< 18 hours old:) Sent from my iPhone using Tapatalk

What I can think of, is that I lubricated where the o ring meets the valve, but not where the valve sits on the filter. Could that of been my mistake? It's on both sides where the clamp is tightened by the screw Thx Sent from my iPhone using Tapatalk

Lol, I guess 40 it is! Sent from my iPhone using Tapatalk

Cya at 35 Sent from my iPhone using Tapatalk