Recent content by allendehl

  1. A

    Replacing pump

    Thank you very much!!!
  2. A

    Smart valves without controller?

    Thank you very much!!!...it is pretty clever!!
  3. A

    Smart valves without controller?

    Basically thinking that if we already have power supply, relays, smart switches that connect via wifi, zigbee, etc...it's very possible that there are valves/actuators that can do the same allowing for a DYI semi automated system.
  4. A

    Smart valves without controller?

    Hi there! Are there smart valves that can be controlled independently from a Home automation app and that does not need a controller? Thank you!
  5. A

    Replacing pump

    Thank you very much poolman! That was a big question I've always had about my current system. I checked online and found the PD 270 and PD 300 in Pool Supply Delivery but the 300 is considerably cheaper than the 270 which doesn't make much sense to me. Is this online store reputable? Dies...
  6. A

    Replacing pump

    Hello folks, I am doing some work on the pool and was thinking about replacing the pump as well. We moved into the house 3 years ago and since the beginning I have the feeling that it is not enough. I don't know the type of pump but the motor is a Century USQ 1102, 1HP. My pool has only one...
  7. 20230129_134714.jpg

    20230129_134714.jpg

  8. 20230127_104531.jpg

    20230127_104531.jpg

  9. A

    Need a solution to connect vacuum hose to skimmer

    Thank you all! I'll try to find the right plate then
  10. A

    Need a solution to connect vacuum hose to skimmer

    Thank you Herman, I actually have this exact same plate from Amazon but it sinks too deep into the neck of the skimmer, that's why I was still hesitant that was the solution. I may need one about half an inch bigger.
  11. A

    Need a solution to connect vacuum hose to skimmer

    Hello all, I'm having an issue where the vacuum hose is getting strangled(and eventually breaking) at the 90 degrees angle right above the connection to the bottom of the skimmer of my pool. I'm assuming there needs to be a solution out there for this. Can someone point me to it? Thank you...
  12. A

    Autopilot Digital - Low chlorine readings

    As usual a great deal of help here. Well, I had already poured the phosphate remover so I guess I'll ride this one for a few more days, validate the Autopilot and then SLAM the pool.
  13. A

    Autopilot Digital - Low chlorine readings

    Hi, The test kit is in his way home. As for adding liquid chlorine, that is what I've been doing to keep the pool under control, but it always end up dropping. I just came back from having phosphates tested and I seem to have over 2500 of whatever they read. Brought back home a bottle of...
  14. A

    Autopilot Digital - Low chlorine readings

    Hello guys, I've bought my AP Digital from Saltpoolguys a few month ago and things were great until a few weeks ago. At first I even had to tune it down since I was getting readings above 6ppm, the pool was looking beautiful. Just a few weeks ago I started seeing signs of green algae building...
  15. A

    Help wiring Autopilot Pool Pilot Digital

    I'll answer my own question in case someone else finds it in the future. I called SalPollGuys and they said it was OK to wire it directly, not behind the pool timer. The Pool Pilot Digital has a flow switch that shuts down the cell as soon as there is no flow coming. I've tested it and it works...