Recent content by 9needawin

  1. 9

    Hayward Goldline Aqua plus menu button not working on panel.

    Instructions above worked for my menu button that wasn't working. Simple fix.
  2. 9

    Cartridge Filter Whining

    Just wanted to follow up and I hate to say it. I took it apart, cleaned the 4 cartridges, re-seated everything, and noise gone.
  3. 9

    Cartridge Filter Whining

    I noticed a whining noise last night and thought it was my pump. After listening closer, it is coming from my cartridge filter (Hayward 4 cartidge). Water level in pool is fine, skimmers and pump basket cleaned out. Of course the noise goes up as I go up in RPMs on the pump. I will open the...
  4. 9

    Plugging returns

    Thank you. I'm going to try plugging 4 and see what that does.
  5. 9

    Plugging returns

    I have 2 2-way valves. One has the returns and bubblers and the other has waterfall and deck jets. I have no way to turn some of the returns on and some off.
  6. 9

    Plugging returns

    Our pool is over a year old and no Algae or chlorine issues yet. The builder put in what I think is too many returns. We have 10 returns. The pool is 18x36 with an 8x8 additional ledge. 2 returns in ledge, 2 in vinyl steps, 2 on shallow wall facing deep in and 4 on sides. Ive gone to the smaller...
  7. 9

    New Vinyl Pool Build in North Alabama

    I think the manufacturer ust looked at the liner and saw the error. I just meant no one came back out to the house to remeasure.
  8. 9

    New Vinyl Pool Build in North Alabama

    Temps haven't been too bad....50s and 60s. The rain is a different story. Our builder actually does a lot of no border liners. I think it is a free option for Tara Liners.
  9. 9

    New Vinyl Pool Build in North Alabama

    Thanks Kim. The fit was on the manufacturer I think. The builder had a conf call with them and no one ever came back out to remeasure.
  10. 9

    New build last year Blue Springs, Mo

    Looks Great! Were they able to get all of the wrinkles out around the steps? We are finishing up our build and have a couple that they say they will have to come back for when the temps are a little warmer.
  11. 9

    New Vinyl Pool Build in North Alabama

    What a loooong few months! We have had more rain in the last few months than I ever care to see again. We had several access delays because of the heavy equipment not being able to get in. We then had delays because we couldn't keep water out of the deep end long enough to finish the pool krete...
  12. pool 3.jpg

    pool 3.jpg

  13. pool 2.jpg

    pool 2.jpg

  14. pool 1.jpg

    pool 1.jpg

  15. 9

    which dolphin

    The S200 is $699 shipped most of the time from Marina Pools and Spa. I'm building now and have researched here for months. That's the best deal I could find and ordered mine yesterday.