Latest activity Postings Media About
-
-
borjis replied to the thread Clearing Iron stains before open?.Crushed vitamin c tablets in a sock is what I use to spot treat. A handful dissolves within about 4-5 minutes. Use Jack's magic pink... -
I called Maytronics, and they were absolutely no help and downright dismissive - could not have cared less. Found the part (called a...
-
27, I would... Why did you opt for the floating baskets in the first place?? Keep in mind that even well working skimmers do not...
-
borjis replied to the thread CYA and Clarity.Ya definitely. If I test 50f water it's definitely higher cya reading unless I warm it up to room temp first. Others have had that...
-
borjis replied to the thread CYA and Clarity.Yep. Every year I open to 20 ppm cya. I then add enough to get to 50 on March first. Needs another 20 ppm added in June to maintain the...
-
I realize it’s a different situation but I chuckled at adding a “cord” to the “cordless” robot.
-
borjis reacted to Homebrewale's post in the thread Buying a sand filter, top mount, side mount, online with
Like.
I'm glad to see someone in the industry using unions. My pool installer did not add unions on each side of the MPV when they build my... -
That's my guess, that the polymer is supposed to bind with the CYA to form something that can then be bound to the carbon. Even if it...
-
The parts I understood appeared it was mostly carbon. So its a big fat Britta filter to my laybrain. 🤷♂️:epds:
-
I think most of us believe there is a small, NATURAL degradation of CYA in a pool. I also think that degradation is temperature...
-
borjis replied to the thread Clear water, with a green tint?.AA treatment lifts the stains, then use something like Jack's magic pink stuff as a sequestrant to keep the metal in solution. I did an...
-
borjis replied to the thread What is the best sequesterant to use after AA treatment?.Jack's magic the pink stuff, should work, but you'll have to continue usage to keep it fully stain free. If the iron is out of solution...
-
Keep in mind that the pH test is not valid when FC level is over 10 ppm. Do you have the ability to drain off some water and refill...
-
borjis reacted to PoolGate's post in the thread Get the same heater they said, it will line right up. with Like.
Personally I would re-plumb everything just to get rid of those ball valves. Not to mention that plumbing looks rather Mickey Mouse to...
-
A CH of 240 in AZ? Wow. Don't see that very often. You do have the option to lower the TA a bit more. In fact, you could go as low...
-
-
Loading…
-
Loading…
-
Loading…