Latest activity Postings Media About
-
-
ajw22 replied to the thread Re-Sealing Stamped Concrete Pool Patio.Maybe they did not want to risk getting colored sealer in the water or on the liner? -
ajw22 replied to the thread Upgrading legacy pentair easy touch with SCG tab.I think the new Carling circuit breaker button will go in the lower right CB slot. The panel you will get will only have the top two CBs.
-
-
ajw22 replied to the thread Standalone vacuum pump.Sure sounds like a suction side air leak. The pump cannot be underpowered for the hoses.
-
ajw22 replied to the thread Maintaining chemicals with pool leak.You will find some information in Slide Valves - Further Reading
-
ajw22 replied to the thread Upgrading legacy pentair easy touch with SCG tab.Welcome to TFP. This thread goes through the mod in detail. What is not clear to you...
-
ajw22 replied to the thread Re-Sealing Stamped Concrete Pool Patio.That arrow in the picture looks like it is pointing to the vinyl liner or the coping. It is not clear what concrete you are asking about.
-
ajw22 replied to the thread Jandy 1HP Pump for sale - Chicagoland.Weekend bump.
-
ajw22 replied to the thread Fitting Intex sand filter/pump to Bestway/Coleman type 22x12 rectangular pool - inlets and outlets.How about drawings or pictures of what you have now and what you are thinking of?
-
ajw22 replied to the thread New DIY IG Pool Build Pittsburgh PA.Skimmer mouths are not a standard size. You need to choose the skimmers you are using and what dimensions the cutouts need to be...
-
ajw22 replied to the thread Error code changed from 123 to 121 after replacing back board in Aqualink system.What is your salt level and how are you testing it?
-
ajw22 replied to the thread Experience with Arctic Pool Heaters Brand (Heat Pumps).Some mention of Arctic Heat Pumps here but it does not look like anyone has experience with them…...
-
ajw22 replied to the thread Blue Works BLSC compatible with Hayward salt cell?.Welcome to TFP. You need to ask Blue Works what cells work with their controller. Blue Works cells do not get good reviews here.
-
ajw22 replied to the thread Low salt light and inspect cell lights are both on.Check that the correct cell type is set in the controller. Post pics of the cell and its serial number.
-
ajw22 replied to the thread Pump pressure drops to zero..Do you have flow out of your pool returns? What does the water look like in the pump basket with the pressure at 0? What is shown on...
-
ajw22 replied to the thread What Aqualink do I have and how can I upgrade?.You need the IQ30-RS upgrade kit that will make your system a RS8. You can leave your PDA antenna installed to use your PDA for basic...
-
-
Loading…
-
Loading…
-
Loading…
