Latest activity Postings Media About
-
-
mas985 replied to the thread Clogged main drain?.Given this is in FL and screened in, the PB was probably just relying on only sand and fine debris to be in the pool and if the MD was... -
mas985 replied to the thread Solar Valve Placement.A check valve is normally placed between the solar valve and filter where there is no room for it. Also, they stubbed the pipes upward...
-
mas985 replied to the thread AQL-PS-8 Remote Emulator App.I actually did some time ago but it has changed a bit since then so feel free to share it.
-
Thanks for the code. I was just coming here to say I did get it to work. I had to comment out the 2 extra "self._append_data(frame...
-
mas985 replied to the thread Clogged main drain?.At the pad, there is no pool MD line coming into the pump so most likely it is plumbed through the skimmer. Look into the skimmer...
-
mas985 replied to the thread The heck is this thing?.It is most likely a pool water bonding point. And yes, it is necessary and VERY important.
-
mas985 replied to the thread What size pump?.PVC gluing is sometime called welding or a solvent weld in the PVC world. Ig-1uZOrlaM PVC heat welding is something different.
-
mas985 replied to the thread What size pump?.Your SWG is way undersized and that maybe the issue here. A 17k pool should have a T-15 cell and not a T-3 cell. But with a VS pump...
-
I thought i would post a followup as it may help someone else later. My front LED display has been shot for years, so i figured i would...
-
mas985 replied to the thread What size pump?.The Intelliflo3 has a built in controller so you can set internal timers for run time and it does not require a separate controller...
-
mas985 replied to the thread AQL-PS-8 Remote Emulator App.Are they saying this code actually works: frame = bytearray() frame.append(self.FRAME_DLE)...
-
There's a couple of people with P4's that have changed the code to support it. I just copied what they did. This seems to be the...
-
mas985 replied to the thread AQL-PS-8 Remote Emulator App.I am not sure the HA software supports the P4. The key code format is different for the P4.
-
mas985 replied to the thread AQL-PS-8 Remote Emulator App.The script in the EW11 handles all the key presses to manage timing. It also handles the device reset and unlocking the configuration...
-
Yes, the protuff version. The quality is GREAT, and it might outlive me. I've got no complaints there. But I haven't got the...
-
-
Loading…
-
Loading…
-
Loading…
