Recent content by 18Wheeler

  1. 18Wheeler

    Newly Installed Hayward Gas Heater (advice on opening pool with)

    Thank you. Yes, it helps to know those numbers.
  2. 18Wheeler

    Newly Installed Hayward Gas Heater (advice on opening pool with)

    Thanks! Yeah, fortunately natural gas is pretty cheap here right now. I figure getting it up to a decent temp will take me longer, but hopefully the solar cover will keep things from cooling back off as quickly once we are ready to jump in. In the summer, it’ll be a non issue as the temps get...
  3. 18Wheeler

    Newly Installed Hayward Gas Heater (advice on opening pool with)

    Thank you both! Good call, I’ll make sure I complete the overnight test. Wish I could’ve gotten a bigger heater, but my gas meter and gas line situation prevented that (would’ve been astronomical in cost
  4. 18Wheeler

    Newly Installed Hayward Gas Heater (advice on opening pool with)

    Thanks very much for the quick reply.
  5. 18Wheeler

    Newly Installed Hayward Gas Heater (advice on opening pool with)

    Greetings all! With the recent events, and having the fam stuck here at the house nearly ALL THE TIME, we decided we'd add a gas heater the pool so we can open a bit earlier and enjoy more swim time this season (and hopefully many to come). There was a heater previously installed, but this was...
  6. 2020-04-17 14.32.15.jpg

    2020-04-17 14.32.15.jpg

  7. 2020-04-17 14.32.27.jpg

    2020-04-17 14.32.27.jpg

  8. 2020-04-16 14.36.23.jpg

    2020-04-16 14.36.23.jpg

  9. 18Wheeler

    Help with return jets coming off!

    Ok...update: I have had luck using teflon tape. I bought the extra thick type (a pink color), and used a lot to wrap around 9 or 10 times. The eyeball threads seem to grip a lot better and stays on tighter.
  10. 18Wheeler

    Help with return jets coming off!

    I’m having the same issue on my return eyeball. In my case, newer replacement eyeballs (Hayward threaded, etc), don’t seem to have quite as deep threads on them. Im going to try teflon tape first, and possibly a seal compound next. Ill let you know how it goes. Any other ideas are greatly...
  11. 18Wheeler

    Diving Board fulcrum question (first world issues!)

    Thanks! Good idea...maybe some strong dbl sided tape along with some small, discreet clamps will help.
  12. 18Wheeler

    Using household bleach in place of store shock

    I acquired a pool last year when we purchased a new home, and though I started with powdered chlorine/shock, I quickly switched to liquid bleach and I have not looked back. As mknauss stated, the powdered stuff will add calcium or cyanuric acid (CYA), both of which can lead to issues in excess...
  13. 18Wheeler

    Diving Board fulcrum question (first world issues!)

    So I purchased a S.R. Smith Frontier 10 foot diving board at the beginning of the season this year. Got everything installed OK on my U Frames, the kids love it, it works great, looks great, etc. My only problem is that the fulcrum I ordered never seems to stay seated in the right position...
  14. 18Wheeler

    Located leak at skimmer (after pressure and dye tests) - Ideas on best repair method?

    Thanks. And I am happy to report no leak still! What a relief to come home and NOT have to pull the hose over to the pool again. Looking forward to a lower water bill too.
  15. 18Wheeler

    Located leak at skimmer (after pressure and dye tests) - Ideas on best repair method?

    Thanks! Yeah, very much like clay. Pretty easy to work with. This stuff will come in handy for sure. I had called Leslie's this morning and they had it in stock, so we were thinking the same there. About $4 more than Amazon, but I didn't have to wait. Here is a pic of the end result...