Latest activity Postings Media About
-
-
kellyfair replied to the thread static shock from the trex deck?.@ajw22 -
kellyfair replied to the thread Pool losing water with cover on.No wet areas of the ground around the pool? I think I would not add water for several days and see if there’s a point where the water...
-
kellyfair reacted to rj2222's post in the thread Pool Blaster Hydro 500 vs. Pool Blaster Centennial Li with
Haha.
That's exactly what I said :D -
kellyfair replied to the thread Pool Snake Cleaner?.Hmmm. With that thing flailing around, I’m wondering what that would do to your PH. I think I’d go for a robot if I were you - to pick...
-
kellyfair replied to the thread Pool losing water with cover on.Have you been getting steady rain? What are the daytime temps up your way? Down here during our dry season I can easily lose that to...
-
kellyfair replied to the thread Can you mount anything to the Upright Support?.Oh, and my box isn’t shaded, but it wouldn’t be hard to attach a shade to post.
-
kellyfair replied to the thread Can you mount anything to the Upright Support?.We put a couple of cross pieces on an open side of my electrical post, and mounted controller to that. We faced it towards the house so...
-
kellyfair replied to the thread Pool Blaster Hydro 500 vs. Pool Blaster Centennial Li.I don’t know anything about them, but in looking at their specs they are very close in weight, batteries last about the same amount of...
-
kellyfair reacted to Macboy's post in the thread Skimmer only or keep side drains in the system too? with Like.
Oh! Come to think of it that might make it easier to get the vacuum hose on if you could momentarily disable the skimmer instead of...
-
kellyfair replied to the thread Can you mount anything to the Upright Support?.Option 3. Because I said so. LOL Seriously, you want your electrical stuff a few feet away from the pool wall. It doesn’t have to be in...
-
kellyfair replied to the thread AGP 18x33, question about uprights.So every single bottom channel is shaped exactly the same? If so, I would assume it’s intentional and will be fine when the pool when...
-
kellyfair replied to the thread FILTRATION SYSTEM.My pool configuration is like that too - factory installed cut outs and I really didn’t want to cut through my resin wall. So I have a...
-
kellyfair replied to the thread FILTRATION SYSTEM.What size is your pump, and how many gallons is your pool? I’m not sure what you mean by it not reaching.
-
kellyfair replied to the thread AGP 18x33, question about uprights.There’s something wonky about your uprights, but I can’t tell what it is. For your concern about the bottom channel, you would need to...
-
kellyfair replied to the thread Wash out under side wall of the line of.I don’t see how you can repair a hole that size without taking pool down. In addition, there’s a darn good chance it will simply wash...
-
-
Loading…
-
Loading…
-
Loading…