Does anyone have any recommendations on a joint sealer for around my concrete and steps into the pool? I have attached a pic of the joint I would like to caulk. Or maybe comments on whether I should or shouldn’t seal this joint, thx
Caulking / Sealant
- Thread starter Rakuz66
- Start date
- Jul 21, 2013
- 65,062
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Post some wider pictures showing where those joints are.
The joint is too small for any caulk or sealer to flow into it. Whatever you put on there will just sit above those surfaces, not look good, and attract dirt.
Why do you feel you need to seal it?
The joint is too small for any caulk or sealer to flow into it. Whatever you put on there will just sit above those surfaces, not look good, and attract dirt.
Why do you feel you need to seal it?
That doesn't look like it needs any caulk. It doesn't get below the water line, right?
It won’t let me post bigger pictures,, I just wanted to seal it to smooth it out and keep debris out if it,, but you’re right it actually doesn’t need to be caulked.
No it doesn’t get below water line,,just wanted to keep debris out of it,, but consensus seems to be not to caulk it.
- Jul 21, 2013
- 65,062
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
