Pentair Globrite Bubbler Wiring Issue

[Darylwal77]

My pool has just been finished and includes a Pentair bubbler with light connected to an IntelliCenter. It is wired to a dedicated transformer and relay but uses a shared breaker. All the other lights work perfectly, change color etc. However, the bubbler light turns to the wrong color, on certain colors it flickers and on others it is just dead... I noticed that when the IntelliCenter cycles the power, the transformer doesn't appear to completely discharge. Could this be the issue or does it transformer need a dedicated breaker? Any help appreciated.

 

[ajw22]

Welcome to TFP.

Make a warranty claim on the Globrite light. It sounds like it is failing.

 

[Darylwal77]

Welcome to TFP.

Make a warranty claim on the Globrite light. It sounds like it is failing.

Thanks for the quick response! It's only a few months old so I shouldn't have a problem with warranty. Do you know if they are sensitive to voltage. It is a 75ft run to the light from the panel and I used the 12v tap.

 

[ajw22]

I would try the 13V or 14V taps and see how the light works.