Aiper Scuba S1 Review
- Thread starter Katodude
- Start date
nostaljake
Well-known member
Thanks for sharing. Definitely a concern. For me, the big appeal of the Aiper is the ease of use. That kind of goes out the window if you have to go outside 3+ times a day to run it.
Right now, I am using it every 3rd day. Now in the Fall that may be more, but it has been very easy and efficient to use this summer.
- Aug 22, 2017
- 2,998
- Pool Size
- 15000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
I use it every day. I clean the filter once a week. Floor mode only.
Throw it in. Pick it up, throw it on the charger.
Super easy.
Throw it in. Pick it up, throw it on the charger.
Super easy.
I updated my software about a month ago following the method outlined above. Decided to get the
most recent update but it doesn’t work. Got into the Aiper Wi-Fi, clicked on the S-1 after pairing the device and get an error message that’s device can’t be located.
Since I’m OK with how it’s working in my pool, I guess I won’t bother upgrading at this time. .
Hello Mike
Out of curiosity, I would try with the firmware version that the unit came with first (note the version number). Observe and take notes of any problems then upgrade to newest firmware and compare. BTW, what model did you get and for how much?
I suspected something like this is happening but when I take it out for cleaning, I don't see anything like that. I suspect it dislodges with the debris as it goes back in the pool.
Orion7319
Bronze Supporter
- Jul 1, 2020
- 1,442
- Pool Size
- 19775
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
What’s the latest firmware for these? Mine has .09 but I thought I saw someone had updated to .1 not sure if that was for a a S1 pro though. Mine says it’s up to date. It works great so it’s not a big deal, just curious.I updated my software about a month ago following the method outlined above. Decided to get the
most recent update but it doesn’t work. Got into the Aiper Wi-Fi, clicked on the S-1 after pairing the device and get an error message that’s device can’t be located.
Since I’m OK with how it’s working in my pool, I guess I won’t bother upgrading at this time. .
- Oct 25, 2015
- 5,812
- Pool Size
- 28000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Folks,
I bought the S1 Aiper a couple weeks ago after my new plaster had cured. I have to admit I really wanted to go with a corded model but wife nixed this after she saw @Katodude 's cordless in his pool. I found it on Amazon for $529. We've put it to a real good test on our new pool since we have an infinity edge that has a basin that's used to catch and recycle water throughout the day. We have had a lot of dust in the bottom every day that this bot removes easily. This really surprised me. We've also found it's limit. We're just finishing up the enclosure installation and had some major storms come through that put about 3" of dirt into the basin (small retaining walls to prevent this had to wait for enclosure structure). When the pool pump kicked on we dumped most of this dirt into the pool. Prior to the rain the S1 had our bottom spotless in one run. After that I ran it in floor mode nightly. It does a superb job. But my "dirt dump" completely over whelmed it. To be fair, I think this would have overwhelmed any cleaner. Hoping to manually vacuum this out tonight with my dive gear. I was planing to do this to get any metal filings and screws out of the pool that dropped during installation anyway.
I have to admit that Robin is right. And I like Andy's logic about $150/year cost even if it only lasts 3 years. Fishing the bot out is super easy with the hook they provide and I'll set up an outdoor table with the charge cord. Based on demonstrated cleaning capability so far I think we'll be able to go to eco mode where it cleans the floor every other day 3 times before it needs charging. I'll update as we gain more experience.
Chris
I bought the S1 Aiper a couple weeks ago after my new plaster had cured. I have to admit I really wanted to go with a corded model but wife nixed this after she saw @Katodude 's cordless in his pool. I found it on Amazon for $529. We've put it to a real good test on our new pool since we have an infinity edge that has a basin that's used to catch and recycle water throughout the day. We have had a lot of dust in the bottom every day that this bot removes easily. This really surprised me. We've also found it's limit. We're just finishing up the enclosure installation and had some major storms come through that put about 3" of dirt into the basin (small retaining walls to prevent this had to wait for enclosure structure). When the pool pump kicked on we dumped most of this dirt into the pool. Prior to the rain the S1 had our bottom spotless in one run. After that I ran it in floor mode nightly. It does a superb job. But my "dirt dump" completely over whelmed it. To be fair, I think this would have overwhelmed any cleaner. Hoping to manually vacuum this out tonight with my dive gear. I was planing to do this to get any metal filings and screws out of the pool that dropped during installation anyway.
I have to admit that Robin is right. And I like Andy's logic about $150/year cost even if it only lasts 3 years. Fishing the bot out is super easy with the hook they provide and I'll set up an outdoor table with the charge cord. Based on demonstrated cleaning capability so far I think we'll be able to go to eco mode where it cleans the floor every other day 3 times before it needs charging. I'll update as we gain more experience.
Chris
- Oct 25, 2015
- 5,812
- Pool Size
- 28000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Standard S1. I didn't really see enough benefit to go with the pro. And If this one didn't work I can return it. Turns out so far it's great!
Purchased the Aiper S1 regular and Pro to test out. The regular actually seems to have stronger suction but BOTH have left black scuff marks in different spots. Initially I thought it was something I did wrong then I noticed them appearing AFTER running them. Yesterday I ran the Pro in full mode and when I checked today there were several black spots that scrubbing doesn't seem to be eliminating. I'm sure more elbow grease will get them off. Never had this issue with my Wave 80. I did see some other threads where people were getting scuffs on their fiberglass pools and at least one saying they had plaster (different model Aiper though)
I’ve been running my S1 for 2 months now. About 5 days a week. I’m impressed with how much it picks up.
Last night though, I dropped it in before going to bed and when I came out this morning it was just sitting on the floor in the middle of the pool. They always stop at the edge so you can hook them out. When I got it out it was still flashing red as if it were still running but at the end of its charge. Very odd for 10 hours after starting, when it’s done the light is always off and it’s completely drained.
I’m recharging now and I’ll run again and see if it runs the full 3 hours.
If anyone has has this happen let me know
Last night though, I dropped it in before going to bed and when I came out this morning it was just sitting on the floor in the middle of the pool. They always stop at the edge so you can hook them out. When I got it out it was still flashing red as if it were still running but at the end of its charge. Very odd for 10 hours after starting, when it’s done the light is always off and it’s completely drained.
I’m recharging now and I’ll run again and see if it runs the full 3 hours.
If anyone has has this happen let me know
Do the debris baskets on both work the same? Debris gets sick part way into the basket on my pro. Wondering if that will be an issue with the regular one.
Orion7319
Bronze Supporter
- Jul 1, 2020
- 1,442
- Pool Size
- 19775
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
I haven’t had this issue so far with the S1.
I didn't have that issue on either but I believe it's the same kind of flap.
Orion7319
Bronze Supporter
- Jul 1, 2020
- 1,442
- Pool Size
- 19775
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
I just accidentally ran this guy an entire cycle without the rubber plug in place over the charging port. Nothing bad seemed to happen. I just dried it really well before charging it again.
Thank you! please follow up. I'm ready to treat myself to a robotic cleaner.
Is it a stainless connector or do you think it will corode in salt water?
