Pondering a switch to SWG

[JFailor]

Thank you all. I appreciate your confirmation!

 

[Jimrahbe]

J,

Kind of like asking yourself if you should pull the ripcord after you have jumped out of the plane.

What is there to ponder???

It will be the best move you have ever made.

Thanks,

Jim R.

 

[BCSB]

I just installed a RJ-60. Easy install and simple to run. I had a minor issue with the SmartFlo pump I bought at the same time and their customer service/techs took care of it right away.
I would highly recommend Circupool.

 

[JFailor]

You all are wonderful support. Thank you. I ended up ordering the Circupool RJ45 and it arrived today.

I could use some help with what timer I should choose for my setup. My Hayward Tristar pump runs on the timer it has built into it. I have an intermatic timber but it runs my water wall pump and the other runs my booster pump for the Polaris.

I had thought the SWCG came with an option to install a 110 plug but it did not. My error. Do I get another intermatic timer to run the SWCG?

Any advice is much appreciated!

 

[PoolStored]

I had thought the SWCG came with an option to install a 110 plug but it did not. My error. Do I get another intermatic timer to run the SWCG?

You want your pump and SWCG on the same timer/control. I'm not a timer guy, I'll let @Jimrahbe pipe in.

As an alternative, I got this idea from @laprjns, and implemented it on my RJ.
I use a CR Magnetic current sensing relay, part number CR4395-EH-120-110-X-CD-ELR . Here's how I wired mine.
If the pump is not running (no current to pump), it will turn off the SWG.