Pump wiring for timer

Jump to latest Follow Reply
B

Bigfellor

Well-known member
Jul 24, 2020
59
Texas
Pool Size
13600
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
CircuPool SJ-40
Hello all. Is it possible to wire this pump to this timer to run at high speed for certain hours then low speed on the off hours?

Honeywell Home TI040/U Industrial Weekly/Daily programmable Indoor and Outdoor Timer, Gray https://a.co/d/gziRdTI

Or do I need a different timer?
 

Attachments

  • 20230404_144847.jpg
    20230404_144847.jpg
    716.4 KB · Views: 10
Bigfellor said:
Hello all. Is it possible to wire this pump to this timer to run at high speed for certain hours then low speed on the off hours?

Honeywell Home TI040/U Industrial Weekly/Daily programmable Indoor and Outdoor Timer, Gray https://a.co/d/gziRdTI

Or do I need a different timer?
Click to expand...
That timer won't switch speeds, it is a "single load" switch. Since a two-speed motor is, essentially, two motors in one case, you need a two-speed timer. That is one that will disable one speed while enabling the other and has the ability to NOT have both on at the same time. Since you are using 115v, get an Intermatic P1353ME electronic clock that will do it when set to the proper mode. This clock will run on that voltage. Don't believe there is anything else readily available that will.
 
1poolman1 said:
That timer won't switch speeds, it is a "single load" switch. Since a two-speed motor is, essentially, two motors in one case, you need a two-speed timer. That is one that will disable one speed while enabling the other and has the ability to NOT have both on at the same time. Since you are using 115v, get an Intermatic P1353ME electronic clock that will do it when set to the proper mode. This clock will run on that voltage. Don't believe there is anything else readily available that will.
Click to expand...
Thanks I'll check into that.
 
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply