- Oct 23, 2021
- 76
- Pool Size
- 26000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
I had my pool builder remove the improperly plumbed extra pump and clean up my plumbing. I've been reviewing and tweaking my Intellivalve automation and my Intake/Return valves are confusing me. In both pictures, pool is on the left, spa is on the right.
I'm expecting that the default is that POOL MODE is the Home (0) position on the Intellivalve and SPA MODE would be the set (>0) position. I'm trying to reprogram my set positions and this is not the case for me. When I turn on POOL MODE the values move the set position, and when I turn on SPA MODE the valves turn to the home position. Is this correct?
I'm expecting that the default is that POOL MODE is the Home (0) position on the Intellivalve and SPA MODE would be the set (>0) position. I'm trying to reprogram my set positions and this is not the case for me. When I turn on POOL MODE the values move the set position, and when I turn on SPA MODE the valves turn to the home position. Is this correct?