- Jul 2, 2022
- 18
- Pool Size
- 22000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
I've found that the reading from the built-in temp probe on the Mastertemp is fluctuating over time. Generally it reads as too low (water will be 80 deg and it reads at 66 deg). However, it's non-deterministic - sometimes it reads the temperature correctly.
I've replaced it with a new Pentair brand probe. The issue persists. Thoughts on the possible issue that would cause different temperature readings like this?
I've replaced it with a new Pentair brand probe. The issue persists. Thoughts on the possible issue that would cause different temperature readings like this?