The storm left this mass for us recently.
This is a saltwater pool with a cartridge filter, and I am a new pool owner.
So please let me know if I am making any mistakes. ANY suggestion will be appreciated!
What I did:
This is a saltwater pool with a cartridge filter, and I am a new pool owner.
So please let me know if I am making any mistakes. ANY suggestion will be appreciated!
What I did:
- Add 1-gallon clarifier with 4 days gap.
- Cleaned the filter with water spray every day for 2 days, and every time I could remove a whole layer of mud from those 4 cartridges. I think what I am doing is helpful, but it makes me feel quite helpless based on the result.
- Cleaned auto cleaner every day and keep it run with pump filter for 24/7 now
- Add flocculant and pump the water out by turn the machine to "drain-only." But I never try this before, so not sure if I am going to lose water too fast (since the pump is quite strong); or I could remove the cartridge from the filter and make 1/2 go waste, and another 1/2 pass through the empty filter without damage machine (this is only my theory haha); or I should try manual vacuum with pipe
- DIY a polyfill filter like those YouTubers, and I still need a limitation that only 1/2 water passes by this DIY filter since the bottleneck could be the problem
- OR I could mix 2 previous plans.