Hey all,
Newb here, done much research, started small with a 18' round AG x 48" (7300 gal), running a 150 sqft cartridge and a Speck 1.1 VS pump I think my problem might be from having a Vision2 chlorinator with the mineral cartridge in line after the filter.
My Taylor 2006C is helping me, and i want to be BBB asap. Levels are 2.6 FC, .2 CC, 7.2 pH, 90 TA, 300 CH, 35 CYA
After going to Leslies and Namco for tests, they inform me of high copper (Leslie says .3 ppm, Namco says 1.7) and high phosphates (Leslie says 714 ppb, Namco says 1516)
I've read about sequestering agents, and will probably use that until a winter drain. Any suggestions about either problem would be appreciated, which agent is good, etc. Thanks in advance
Cindy and Dan Fenton
Newb here, done much research, started small with a 18' round AG x 48" (7300 gal), running a 150 sqft cartridge and a Speck 1.1 VS pump I think my problem might be from having a Vision2 chlorinator with the mineral cartridge in line after the filter.
My Taylor 2006C is helping me, and i want to be BBB asap. Levels are 2.6 FC, .2 CC, 7.2 pH, 90 TA, 300 CH, 35 CYA
After going to Leslies and Namco for tests, they inform me of high copper (Leslie says .3 ppm, Namco says 1.7) and high phosphates (Leslie says 714 ppb, Namco says 1516)
I've read about sequestering agents, and will probably use that until a winter drain. Any suggestions about either problem would be appreciated, which agent is good, etc. Thanks in advance
Cindy and Dan Fenton