I'm a new above ground pool owner with a newly installed ACT750 heat pump (manufactured in 2020) on a 24' round 48" pool. I'm in MA and we had downpours yesterday with maybe a high ambient temp of 62. I have had the single speed pump and the heat pump running 24*7 set at 82. It is installed with the 30amp max allowed breaker.
The highest water temp hit yesterday was 77 and the highest water temp hit this morning so far is 77. I did the thermometer test. Ambient air temp is 60 with a dense and cool fog and the air coming off the ACT750 fan is at 58. There is good air flow and it is a new unit.
My question - is this normal for a heat pump in these conditions (aka welcome to using a heat pump in New England)? In overcast conditions with a high of about 68 the pool did hit 82. I use a solar shield, but not a solar cover.
Thank you.
The highest water temp hit yesterday was 77 and the highest water temp hit this morning so far is 77. I did the thermometer test. Ambient air temp is 60 with a dense and cool fog and the air coming off the ACT750 fan is at 58. There is good air flow and it is a new unit.
My question - is this normal for a heat pump in these conditions (aka welcome to using a heat pump in New England)? In overcast conditions with a high of about 68 the pool did hit 82. I use a solar shield, but not a solar cover.
Thank you.