Foam on water while slamming

TRUK71

Well-known member
Jul 21, 2020
159
Indianapolis, IN
Pool Size
7000
Surface
Fiberglass
Chlorine
Salt Water Generator
SWG Type
Jandy Truclear / Ei
Ok so I'm slamming because I can't keep any FC in pool and it's very cloudy. I had a new VSP installed and they didn't turn my salt cell back on and I didn't realize it until it was too late. So I started a slam but now am getting a foam like substance on top of water. I also am raising my cya at same time. Could the foam be a reaction to an organic or a reaction to CH? My CH is at 290, it's usually around 320. 20210621_175214.jpg
 
Hmm -- not sure but many pool store potions like to foam up.
The SWCG sometimes can create really fine bubbles under certain circumstances. Do you see the cloud coming out of the returns?
 

Enjoying this content?

Support TFP with a donation.

Give Support
Don’t know if it’s just the image upload but that looks more like an oil-slick swirl than bubbles.

Does someone like to use lots of lotions/sunblock/hair products/etc before swimming?
 
  • Like
Reactions: borjis and duade
Oh, and never add MPS to a chlorine pool. As Marty said, your CCs will now read persistently high for many weeks. You’re going to have to ignore that reading for a while because it’s a positive interference.
 

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.