- Jun 22, 2010
- 50
- Pool Size
- 15000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
i had been using pucks for a year and a half and cya was through the roof so I did and 80 percent drain and fill. So I am assuming low salt as we have good water.
I added 400 lbs of salt and according to my new aquachek salt strips I am at 4000 ppm. The new cell and sensor says I am at 4700. I took a sample to Leslies pool and they put the reading at 3200.
What do I trust and is there a way to calibrate the new sensor
I added 400 lbs of salt and according to my new aquachek salt strips I am at 4000 ppm. The new cell and sensor says I am at 4700. I took a sample to Leslies pool and they put the reading at 3200.
What do I trust and is there a way to calibrate the new sensor