Hayward SAS-ABG

[red-beard]

@C0d3Sp4c3 thanks for the info on the board! Good to know.

 

[lplatz]

Thermistor is a two wire resistive temperature device. If you read resistance with a volt-ohm meter, it is probably good. Open circuit or short circuit is bad. Usually they are 100 Ohm, 1K Ohm or 10K ohm. not sure on this particular one.

When I test the Thermistor, I don't need to pull it from the board do I?

 

[lplatz]

Question on the plumbing for the new T-Cell-15. Confirming this Cell does not need a flow switch? Also, can this cell be installed horizontally?

 

[C0d3Sp4c3]

Question on the plumbing for the new T-Cell-15. Confirming this Cell does not need a flow switch? Also, can this cell be installed horizontally?

The Hayward Turbo cell 3, 5 , 9, and 15 physical dimensions are the same and requires no plumbing mods to interchange.
Correct, the Aquatrol RJ model does not need a flow switch. And yes, you can install the T-cell horizontally but why would you on a RJ? Please take a gander at the Aquatrol User Manual

 

[CrystalRiver]

RJ requires vertical installation at the return jet. Horizontal installation is not allowed, nor is installing it in any other location.