my pool is going to be about 35000 gallons what options do i have my PB offers Jandy/polaris products i couldnt seem to find a 60,000gal cell on their site is the 40,000 enough?
what SWG options ?
- Thread starter Sever
- Start date
- May 3, 2014
- 58,260
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Where is IE, CA? If on the coast, yes, it will be. If in Riverside or Banning or Blythe, it might be OK as long as you are willing to run the pool system 24 hours a day from around May through September.
- May 3, 2014
- 58,260
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
The pool must be going to be very deep. For a 15' by 30' pool to be 35000 gallons it will need to be over 10' deep throughout that area.
lol that was my old pool just realized that and deleted the signature sorry for the confusion it will be 24 x 38
S,
I assume that you will have no spa...
You need the following.. IntelliFlo VS pump, IntelliCenter with built-in SWCG power supply and IC60 IntelliChlor package.. and as a minimum the CCP-320 filter.
Like this.. Pentair IntelliCenter 5PIC60 Kit - Pool only with Load Center and IC60
We always recommend a SWCG that is rated for 2 x the volume of the pool.. But the IC60 will work fine for you..
Thanks,
Jim R.
I assume that you will have no spa...
You need the following.. IntelliFlo VS pump, IntelliCenter with built-in SWCG power supply and IC60 IntelliChlor package.. and as a minimum the CCP-320 filter.
Like this.. Pentair IntelliCenter 5PIC60 Kit - Pool only with Load Center and IC60
We always recommend a SWCG that is rated for 2 x the volume of the pool.. But the IC60 will work fine for you..
Thanks,
Jim R.
- May 3, 2014
- 58,260
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
For your area, only thing I would change from Jim's list above is a CCP520 filter. For that pool volume and that area, the biggest filter you can get will keep you from cleaning it so often.
i will be meeting with them tomorrow and will discuss with you guys what they are offering
mguzzy
Gold Supporter
their Equipment is as follows
Jandy 2.7hp Variable speed pump big basket
Jandy PLus hp 1 speed pump
Jandy 580 Cartridge Filter
Jandy JXI Versaflow 400,000 BTU Heater
they gave me the option for the Nature 2 Fusion soft
so my question is can i just get the Pentair IC60 in with this system?
Jandy 2.7hp Variable speed pump big basket
Jandy PLus hp 1 speed pump
Jandy 580 Cartridge Filter
Jandy JXI Versaflow 400,000 BTU Heater
they gave me the option for the Nature 2 Fusion soft
so my question is can i just get the Pentair IC60 in with this system?
mguzzy
Gold Supporter
What controller are you looking at? All that equipment will work fine with an IC60 and Pentiar controllers. Did they quote one?
- May 3, 2014
- 58,260
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Sure, it just will not be controlled by the Jandy automation. Why not get Pentair automation and equipment? It is your pool, get the equipment you want.
the PB is not authorized for Pentair i asked or hes just getting a way better deal on Jandy im guessing?
- May 3, 2014
- 58,260
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Any professional, plumber, electrician, essentially anyone that will provide an invoice is considered ‘authorized’ by Pentair. Your PB gets a better deal from jandy. Jandy is not diy friendly. And it is difficult to get repair parts for Jandy equipment without going through one of their service providers.
thank you I will tell him what I want if he can't provide i will rescind the contract
Similar threads
