Hello all,
I have an Intext prism frame pool that is running a Intex Krystal Clear 2150 GPH Sand Filter Pump & Saltwater System with E.C.O. The pool is allegedly 3800 gallons or so. I am getting the following readings using the t-100 kit
Salt 3000 ppm
fc- 10
cc- 1
tc- 11
CH- turns blue right away. does this mean that there is no calcium? Is this bad?
TA- 100
CYA-0
PH-7.5
The water is cloudy. It was green, but I used some shock. I can see the bottom of the pool, but not across it if that makes sense. I have pool math but have no idea what to do as I feel like this is a weird situation that warrants some special attention. I have attached some pictures. If anyone could point me in the direction of what i need to do, it would be appreciated. Thank you for your time.
I have an Intext prism frame pool that is running a Intex Krystal Clear 2150 GPH Sand Filter Pump & Saltwater System with E.C.O. The pool is allegedly 3800 gallons or so. I am getting the following readings using the t-100 kit
Salt 3000 ppm
fc- 10
cc- 1
tc- 11
CH- turns blue right away. does this mean that there is no calcium? Is this bad?
TA- 100
CYA-0
PH-7.5
The water is cloudy. It was green, but I used some shock. I can see the bottom of the pool, but not across it if that makes sense. I have pool math but have no idea what to do as I feel like this is a weird situation that warrants some special attention. I have attached some pictures. If anyone could point me in the direction of what i need to do, it would be appreciated. Thank you for your time.