We had a lightning storm come through last night and the following power surges from the local electric co seemed to knock out my Driver Controller (353127).
I've reviewed several many posts on this site today (great resources)...but none resolved my issue.
I've left the power OFF for 24hrs to dissipate any charge in a capacitor in the motor (assuming there is one).
I have decided to go ahead and order the Driver/Cover kit (353127), but would like to see if anyone knows how to "bypass" the driver controller so I can get the water flowing again?
I can't seem to find a wiring diagram anywhere on the interwebs, including at Pentair.com
I've got power to the pole next to the pump. I've checked the voltage reading of 115v on each post to the pump. So the power coming into the pump is good.
I read power going to the Driver Controller (although the keypad won't respond to a reset or simply "start").
The line power connects to the Driver Controller, it flows through the keypad (which doesn't respond), and then to the motor.
The motor has 3 wires. Blue, Brown, and White. I'm thinking that I they are for line1, line2, and neutral. but I've only got two hot lines coming in plus a ground wire.
Does anyone have a wiring diagram for the Pentair superflow vs 342001 so I can show my electrician?
Any help would be appreciated.
=================
Blessed with someone that loves me, 9 kids, 30 grandkids, and 40k gallons of happiness.
I've reviewed several many posts on this site today (great resources)...but none resolved my issue.
I've left the power OFF for 24hrs to dissipate any charge in a capacitor in the motor (assuming there is one).
I have decided to go ahead and order the Driver/Cover kit (353127), but would like to see if anyone knows how to "bypass" the driver controller so I can get the water flowing again?
I can't seem to find a wiring diagram anywhere on the interwebs, including at Pentair.com
I've got power to the pole next to the pump. I've checked the voltage reading of 115v on each post to the pump. So the power coming into the pump is good.
I read power going to the Driver Controller (although the keypad won't respond to a reset or simply "start").
The line power connects to the Driver Controller, it flows through the keypad (which doesn't respond), and then to the motor.
The motor has 3 wires. Blue, Brown, and White. I'm thinking that I they are for line1, line2, and neutral. but I've only got two hot lines coming in plus a ground wire.
Does anyone have a wiring diagram for the Pentair superflow vs 342001 so I can show my electrician?
Any help would be appreciated.
=================
Blessed with someone that loves me, 9 kids, 30 grandkids, and 40k gallons of happiness.