- Nov 7, 2018
- 1,049
- Pool Size
- 14000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Had a bit of bad weather yesterday, but nothing terrible. We did, however, have a whole bunch of rain which caused quite the runoff into the pool. As you can see, there is a lot of sediment. We are hoping to have a housewarming/pool party this Saturday, so hopefully I can get this dealt with in 4 days. Current numbers:
FC: 6.0
CC: 0.5
pH: 7.7
TA: 110
CH: 300
CYA: 70
Plan is to get pH to 7.2 and start slam. There doesn't appear to be too much debris (outside of the sediment), so going to toss the robot in as well. Filter is on now and will remain on until clear.
Any other thoughts/recommendations?


FC: 6.0
CC: 0.5
pH: 7.7
TA: 110
CH: 300
CYA: 70
Plan is to get pH to 7.2 and start slam. There doesn't appear to be too much debris (outside of the sediment), so going to toss the robot in as well. Filter is on now and will remain on until clear.
Any other thoughts/recommendations?


Last edited: