Just installed a circupool SJ55 and I don’t think it’s producing as much FC as it should. When I run the SWG for 12 hours on 75%, the highest my FC goes is 6. The same holds true if I turn it up to 100%. I called Circupool and they gave me the run around about phosphates. They also recommended to raise my salt level from 3400 to somewhere between 4000-4500. I am currently adding more salt (slowly). Today I am at 4000 and I tested the water from the jet (using my vacuum hose to fill my vial so it’s not diluted). I have the SWG at 100%, and the Chlorine level coming out is 6. If it only comes out at 6, how could my FC ever rise higher than that? I know target is 6 for my CYA level, but I’d feel safer if I could get my FC to 7.
FC 5
CC 0
Ph 7.6
Allk 70
CH. 120
CYA. 70
Pool is clear and passes OCLT, so everything is fine there. I’m just wondering how high of a level of chlorine other people’s SWGs produce? I was thinking mine would be more
FC 5
CC 0
Ph 7.6
Allk 70
CH. 120
CYA. 70
Pool is clear and passes OCLT, so everything is fine there. I’m just wondering how high of a level of chlorine other people’s SWGs produce? I was thinking mine would be more