I notice that you have used the third relay over as the "Pump Filter" relay.. As long as it is connected to the Pump/Filter connector on the main board, it will operate fine. But, since most installs use the very first relay on the left (as well as the diagram on the door) as the Pump/Filter relay, it could be confusing for the next guy to use/troubleshoot the panel... Any reason you did this??
I didn't do the install. I had an electrician install the panel.
What are you currently using the 4th relay over for... (This would normally be the Aux 3 relay, if connected per the door diagram) ???
Not sure. I think we have only the pump, the IntelliBrite, and a water feature on the pool.
- - - Updated - - -
maybe the 3rd relay is running 2 of the 3 and the 4th relay is running the other?