New Build - Allen Tx
- Thread starter nateb
- Start date
- Apr 23, 2017
- 2,400
- Pool Size
- 22000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
I would say yes since it concerns you build but the moderators will let you know if something needs to be moved...thats my best guess since I am as new as you are to TFP.
Alrighty, just completed pool school and had my polaris installed...will this this be in the way all the time (ie can I push it to the side or...)?
I like the contrast too....color is a little uneven. but I was told that will clear up
Esloser
0
If it's just us, I usually keep mine plugged into the side of the pool but put it and all the hose up on the pool deck.
If we are having people over, I will take it out and hide it behind the pool equipment for a few hours. Usually plug it in at the end so it can run the next day.
If we are having people over, I will take it out and hide it behind the pool equipment for a few hours. Usually plug it in at the end so it can run the next day.
Alrighty, just completed pool school and had my polaris installed...will this this be in the way all the time (ie can I push it to the side or...)?
Is this suppose to be happening to my spillway already (2 weeks in)...or is this an issue at all ?
Is this suppose to be happening to my spillway already (2 weeks in)...or is this an issue at all ?
What is happening? I can't tell by the picture, is there something wrong? Pool looks great to me!
there's a crack in the grout. the on said that happens with settling and they'll fix it.
No it's not pebble. Initially had selected pebble but a few unexpected overages moved me down to 80/20 quartz ....plaster. platinum is the color.
Thanks! It looks great! We're about to build so I may consider this. We're also building with Riverbend Sandler.No it's not pebble. Initially had selected pebble but a few unexpected overages moved me down to 80/20 quartz ....plaster. platinum is the color.
Could somebody tell me how I should clean this off my spillover? And what did I do to make it happen?
Gorgeous pool! Riverbend is coming out on Monday for a consultation. I was told Quartz plaster is smoother than PebbleTec. Is yours smooth for the kiddos' feet?
- May 3, 2014
- 62,717
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
What are you specifically asking about in the picture?
If you run that bubbler and spillover very much you need to be quite diligent about watching your pH. That is a large amount of aeration.
If you have high CH water you will get calcium buildup on spillovers/waterfalls.
If you run that bubbler and spillover very much you need to be quite diligent about watching your pH. That is a large amount of aeration.
If you have high CH water you will get calcium buildup on spillovers/waterfalls.
I was told the same thing about quartz (why I changed from pebbletec). But either my kids have the most tender feet next to new-borns or it like fine-grit sand paper. I'd hate to see what pebbletec does to them....I assume it will get better with time because they are in it everyday for 3-4 hours straight.
Ladies and gentlemen, we have a winner....My ph is Always off the charts (with the spillover). Any suggestions on preventing or cleaning it? Should I powered it or put a toothbrushto it? .... decrease the spillover time...gallons and gallons of MA?
