Search results

Thanks CDGera, We have had great success with the PureLine Pure Colors LED Bulbs We have a few videos we made which you might find helpful and I have listed below. How to Replace a LED Pool Bulb Video How to Replace a Swimming Pool Light Fixture Video

Hi CyclingCraig, I spoke with our engineer and he stated that the amperage should be 5.7 amps and not the 4.1 amps you are seeing. They think this possibly could be due to a bad main PCB Board. Would you be okay with us shipping you out a replacement PCB? Its a relatively easy swap out. If you...

Hi CyclingCraig, I spoke with the engineer and he asked if you could put a voltmeter on the incoming power to the power supply to make sure you have good voltage going to the power supply. Can you confirm your voltage with a volt meter and post the results back to this thread? Thanks so much!

Thanks everyone for the input on this. I have also reached out to our engineer of this salt system to see if can shed any more light on the output production of the Crystal Pure. As soon as I hear back I will post to this thread.

ar26pt6, Thats great! I'm glad it's working well for you, I would love to see some photos if you get a chance. You could post them back to this thread.

Thomas could you post a few photos showing the wires you are attempting to hook up?

Unfortunately I'm not aware of an add-on diffuser that you can purchase. We do carry a $150 LED Bulb that has pretty broad beam spectrum, you could possibly return the $70 bulb you purchased and get one of these PureLine PureColors LED Bulbs

Hi, Ideally you would get a skimmer with the exact same dimensions as your ProLine skimmer. If you cannot find one with the exact dimensions then you will want to make sure that the skimmer you get is larger then your current hole opening in the pool, as you can cut the opening a little larger...

Yes what you stated is spot on and correct. You could actually replace the bulb after the fixture installation but it would be easier to do it first.

Thanks SMH2, I would love to see some photos of the pool at nice if you get a chance. Yes you are fine using the gasket that came with the light fixture since it is brand new. D103 is absoultely correct in what he stated about the spring.

I would suggest the replacing the incandescent bulb inside the Pentair 78456300 Amerlite with a PureColors LED Color Changing Bulb. I like the combination of the Amerilite with the PureColors bulb as the PureColors bulb is replaceable. If you go with something like the Pentair Intellibrite...

Hi elblair, Sometimes when attempting to seal lids similar to these air pressure inside works against the lid. You might want to makes sure the air relief valve and/or even the drain cap is open as you try to seal the lid down.

Hi ElisiaY, Most of the LED pool lights have a Kelvin rating of 6,000K and this higher kelvin rating make the white light have more of a bright white / blue look where the lower Kelvin bulbs have more of a warm look. Here is an image I found which shows this.. I beleive the lenses for the...

Hi SMH2, Nice to hear from you! Yes the 30 foot 120v colored LED spa light is available, thank you for bringing that Availability Notice to my attention as I will have that removed from the website. These light fixtures use the V1 bulbs. Yes we are going to have a Memorial Day Sale which will...

Kdblev, If you wanted to switch out the complete pump then there are a few 115V options for variable speed in the $700 - $750 range. The Pentair SuperFlo VS and the Hayward Super Pump VS

Hi Poolk, I know Hayward had the same issues with there ColorLogic 320 lights for about a 1 year time frame around 2016 where the gaskets that sealed the light ended up leaking, causing the lights to fail. I have a friend who had 7 of his 12 lights fail, all had apparent water leakage. Hayward...

Hi KdBlev, Thanks for the photos those are helpful. In our experience the Century Variable Speed (VS) Motors are reliable, we have run across other VS motors that have not been as reliable as the digital controllers had some issues but this has not been the case with the Century VS Motors and we...

Hi KDblev, Thank you for the photo of the motor that is helpful. If you decided to go up to 1.5 HP then you would need this 1.5 HP Super Pump Impeller and this Super Pump Seal Kit Here is a Video on How to Replace a Motor that we put together and thought you might find helpful when you tackle...

Hi KdBlev, You could go with the same replacement motor which is the Century UST1102 1 HP Up Rate Motor there is also the Energy Efficient Version of this Motor which is the UCT1102 1 HP Energy Efficient Motor, the UCT1102 will give you the same output of water as the UST1102 but costs about...

Hi Santacruzpool, Unfortunately there is not a PureLine replacement for the small nicheless style lights. I would call Jandy and raise some sand (insert adult word), and many times they take care of you even if the light is outside of the normal warranty period. Let me know how it turns out.

Hi JoeDean, I also have the Jandy Water Colors lights with a Jandy automation system and I have replaced 3 lights over 5 years at a price tag of $1,000 per light replacement. It is possible to use a different manufacturer of LED lights with your Jandy automation system and the newer Jandy...

Here is the document about the light ring adapter which you may find helpful