...id for a subscription and adjust the expiry date to fix it for you. Sorry for the hassle!
707 bytes (115 words) - 17:29, 25 July 2020
==Checking the Impeller for Debris==
The O-ring plug is preferable if the pump hole has a flat spot for the O-ring to mate with.
2 KB (319 words) - 11:23, 20 May 2020
...one to your home, it’s important to consider the various landscaping ideas for around your pool.
...r landscaping adds to the aesthetic of the new addition and it’s important for protecting your pool as well. With water getting continually splashed, you
4 KB (791 words) - 02:10, 31 May 2020
...art-up instructions for new plaster if provided. Below are start-up guides for reference.
...ced water.<ref>https://www.troublefreepool.com/threads/the-csi-is-reliable-for-plaster-based-pools.176082/#post-1553632</ref>
2 KB (300 words) - 15:13, 11 August 2023
...nce is essential for ensuring that your pool is clean, safe, and enjoyable for you and your family. While hiring a professional pool service company can b
...arly can help you maintain the correct chemical balance, reducing the need for costly chemical treatments and pool additives.
4 KB (684 words) - 03:37, 18 February 2023
For pool purposes, in layman's terms, RO is a type of very fine filtering perfo
...ve for a large scale treatment like a pool so the service is not an option for most of the country. Usually only available where there is big demand due t
2 KB (374 words) - 18:55, 27 December 2023
...ost common strength of bleach sold in stores. Chlorinating liquid labeled for pools is sold in 10 or 12% strength, and the cost varies from region to reg
...he Trouble Free Pool homepage for the current year's bleach price thread. For example, "2019 Bleach Prices" pulls up this thread<ref>https://www.troublef
3 KB (450 words) - 14:09, 4 October 2021
...e your own test kit to check your water chemistry. See [[Pool Test Kits]] for test kit recommendations.
For more see [[DE Filter Use and Care]]
3 KB (495 words) - 14:28, 26 December 2022
The pressure switch has an adjustment range for heater placement. Consult the manufacturers installation manual. If the hea
For example the chart below illustrates the adjustment range for the pressure switch in a Raypak 406A gas heater:
3 KB (457 words) - 23:40, 9 January 2023
...l as others "downstream."<ref>https://www.troublefreepool.com/threads/prep-for-reviving-out-of-service-pool-finishing-pad-rebuild-slam-in-progress.199862/
Accidental events (like a broken water main, for example) can create a situation where water is sucked out of a contaminated
3 KB (601 words) - 15:44, 11 December 2020
...r%20Pool%20Professionals%20%20March%20%202020.pdf#page=5 Technical Updates for Pool Professionals] shows all the pump models that work with Omni-Based sys
...Logic has the widest capabilities of Hayward automation. It is appropriate for new pool construction beyond the ability of the OmniPL system.
5 KB (685 words) - 19:50, 16 December 2023
...bably the best), a pair of decent scissors, and a wallpaper seam roller to help apply the patch.<ref>https://www.troublefreepool.com/threads/hole-in-vinyl-
...he floor you probably need SCUBA gear since a new patch needs to be worked for a few minutes to insure that it doesn't just peel right off.
2 KB (418 words) - 08:16, 4 October 2021
...lling it up, but don’t know what to do next. Here’s a quick-start guide to help.
==Caring for New Plaster in Your Pool==
5 KB (914 words) - 19:18, 11 February 2024
=Preparing Your Pool for Cooler Months=
...limates where a pool can be left open throughout the year. Below are tips for what to do when the swimming season is over and the pool becomes a water fe
6 KB (1,040 words) - 17:28, 18 January 2024
The proportional generation method varies the voltage and amperage for the generation % and continuously produces chlorine. This design is often f
|2%||1 LED blinking - Produces chlorine for 64 seconds of every hour.
7 KB (989 words) - 14:31, 4 November 2023
TDS is not very important for pool care. It used to be a way to tell when water was "old", but that was b
...hloride ions in your pool water in order to establish a calibration factor for the meter.<ref> https://www.troublefreepool.com/threads/salt-levels.205078/
3 KB (451 words) - 20:06, 4 October 2021
Shotcrete / concrete is ready for water as soon as the initial set is complete, which is about 4-6 hrs after
...poses). As the chart shows, it's really the first 7 days that are critical for keeping the concrete moist if you want to achieve full 28 day strength.
6 KB (991 words) - 14:43, 8 March 2024
...at loss through evaporation/radiation ... solar cover is a really bad name for them.<ref>https://www.troublefreepool.com/threads/solar-cover-question.7365
...will be some heat transfer for thin covers such as electric safety covers. For bubble-type covers, there won't be much sunlight absorption and heat transf
4 KB (756 words) - 16:55, 13 September 2020
...filters and bottom in for DE filters. Make sure you have the correct MPV for your filter.
...and Hayward filters. Confirm you have the correct part number and fittings for your filter.<ref> https://www.troublefreepool.com/threads/new-multi-port-do
7 KB (1,094 words) - 15:04, 11 May 2024
*Aqualink TCX for New Pools (TCXP)
*Aqualink TCX Retrofit for Intermatic Enclosures (TCXPCONV)
4 KB (688 words) - 23:14, 23 March 2024
