Pentair IntelliFlo Pumps
IntelliFlo is Pentair's family of variable speed (VS) pumps that connect to Pentair Automation Systems using a RS-485 data communication cable. When connected to an automation system the pump is controlled by the automation system and the display on the pump display "DRIVE NOT ACTIVE'. Otherwise the IntelliFlo pump is controlled by its control panel on the top rear of the pump.
The IntelliFloi pump is the only VS pump that can be fully controlled by Pentair Automation Systems
The IntelliFlo control panel has 8 programmable speed settings and built-in timer.
Models
- IntelliFlo VS - 011018 - Discontinued - is a basic VS pump
- IntelliFlo VS - 011028 - replaced the 011028 - It has a new rotatable keypad for easy access and has an optional wall mount kit that’s sold separately
- IntelliFlo VSF - 011056 - allows the pump to be set to maintain a speed or a flow in GPM. The pump will automatically increase pump speed to maintain the set flow.
- IntelliFlo VS+SVRS - 011057 - The IntelliFlo VS+SVRS pump features a system that automatically shuts off when it detects drain blockage. This variable speed pool pump features a system that automatically shuts off when it detects drain blockage, providing an important layer of protection against entrapment. This pump is NOT RECOMMENDED unless required by local regulation. The SVRS feature is too sensitive to minor fluctuations and can find your pump shut off with no notice.
