Difference between revisions of "Hayward Super II Pump Repair" - Further Reading

Toggle sidebar Toggle sidebar
Page Discussion
View source History
(Created page with "==Checking the Impeller for Debris== To open the pump shut off power at the breaker and remove the six bolts and pull back the power end.<ref>https://www.troublefreepool.com/t...")
 
m (Added Stub Tag)
Line 1: Line 1:
−
==Checking the Impeller for Debris==
+
{{stub|date=2019-11-29}}==Checking the Impeller for Debris==
 
To open the pump shut off power at the breaker and remove the six bolts and pull back the power end.<ref>https://www.troublefreepool.com/threads/grinding-noise-around-pump-and-multiport-valve.193183/post-1702724</ref>
 
To open the pump shut off power at the breaker and remove the six bolts and pull back the power end.<ref>https://www.troublefreepool.com/threads/grinding-noise-around-pump-and-multiport-valve.193183/post-1702724</ref>
  

Revision as of 19:18, 29 November 2019

This article is currently incomplete. While this article is off to a good start, it still has room for major improvement. Until the article reaches its full potential, it will be hidden from search results.

==Checking the Impeller for Debris==

To open the pump shut off power at the breaker and remove the six bolts and pull back the power end.[1]

Don't remove the back cover like he does in the video at https: //youtu .be/Hy1meV5Y4iQ.

Remove the diffuser and check the wear ring and impeller.

  1. ↑ https://www.troublefreepool.com/threads/grinding-noise-around-pump-and-multiport-valve.193183/post-1702724
Retrieved from "https://www.troublefreepool.com/wiki/index.php?title=Hayward_Super_II_Pump_Repair&oldid=2454"
Top Bottom
Back