(Created page with "=Skimmer Leaf Guard= In the fall with leafs falling the skimmers can get clogged with leafs if you leave your pool open all year. Storms can blow leafs off of treas and clog...") |
|||
| Line 6: | Line 6: | ||
==Commercial Products== | ==Commercial Products== | ||
| − | [http://www.skimmerguard.com/ Skimmer Guard] | + | ===Skimmer Guard=== |
| + | [http://www.skimmerguard.com/ Skimmer Guard] works on above ground and in-ground vinyl liner and fiberglass pools. They have two sizes that fit in front of the skimmer mouth: | ||
| + | |||
| + | *Intakes 7 5/8" wide x 5 5/8" tall (Hayward SP1084L) | ||
| + | *Intakes 15 1/4" wide x 5 5/8" tall (Hayward SP1085, Pentair Widemouth) | ||
==DIY== | ==DIY== | ||
Revision as of 20:10, 12 November 2019
Skimmer Leaf Guard
In the fall with leafs falling the skimmers can get clogged with leafs if you leave your pool open all year. Storms can blow leafs off of treas and clog skimmers and starve pumps of water at times when you most need the pump running and possibly freeze protection.
There are commercial products and DIY skimmer leaf barriers.
Commercial Products
Skimmer Guard
Skimmer Guard works on above ground and in-ground vinyl liner and fiberglass pools. They have two sizes that fit in front of the skimmer mouth:
- Intakes 7 5/8" wide x 5 5/8" tall (Hayward SP1084L)
- Intakes 15 1/4" wide x 5 5/8" tall (Hayward SP1085, Pentair Widemouth)
DIY
Skimmer Leaf Trap
Skimmer Leaf Trap on Instructables is built with PVC pipe and a net to hang over the skimmer opening.
