(Created page with "=Jandy Aqualink TCX= The Jandy Aqualink TCX is a pool only control system that comes in two versions: *Aqualink TCX for New Pools (TCXP) *Aqualink TCX Retrofit for Intermatic...") |
|||
| Line 6: | Line 6: | ||
Both versions support one single speed pump or VS pump, heater using a 2 wire [[Heater Control with Automation|Fireman's Switch]], and one JVA actuator. The TCXP version comes with a Power Center that is optional for the TCPCONV version. | Both versions support one single speed pump or VS pump, heater using a 2 wire [[Heater Control with Automation|Fireman's Switch]], and one JVA actuator. The TCXP version comes with a Power Center that is optional for the TCPCONV version. | ||
| + | |||
| + | The chart below from [https://cdn.fluidrausa.com/-/media/zodiac/global/downloads/jandy/automation/9544_sl_automationselection.pdf?rev=dd4745739f7f46409a352503759753b2 Jandy's Automation Selection Guide] compares the features of [[Jandy Aqualink RS|Aqualink RS]], Aqualink PDA, and Aqualink TCX. | ||
Revision as of 20:50, 23 March 2024
Jandy Aqualink TCX
The Jandy Aqualink TCX is a pool only control system that comes in two versions:
- Aqualink TCX for New Pools (TCXP)
- Aqualink TCX Retrofit for Intermatic Enclosures (TCXPCONV)
Both versions support one single speed pump or VS pump, heater using a 2 wire Fireman's Switch, and one JVA actuator. The TCXP version comes with a Power Center that is optional for the TCPCONV version.
The chart below from Jandy's Automation Selection Guide compares the features of Aqualink RS, Aqualink PDA, and Aqualink TCX.
