Zodiac Controller Issue

[Lineman7]

I don't know if the problem is with the pump or the controller.

"Unknown Fault" is difficult to diagnose.

Maybe contact Jandy to see what they can tell you.

Well, that was a dead-end road. Fudge.

Hello Josh,

Thank you for reaching out to product support. Unfortunately, this fault will require a servicer onsite to further troubleshoot. You can try to reset your pool breakers but if that does not change anything please use the link below to locate and contact a warranty tech near you. Let me know fi you have any questions.


Thank you for reaching out to us.

I saw a little snippet on a website that said this is usually some sort of grounding issue with the pump. But there was no troubleshooting info. Back to the drawing board.

 

[Lineman7]

I'm back. Still fighting this controller. Still getting "fault unknown". I power it off at the breaker and back on and it'll clear and run for 4-6hrs, or overnight. I get up and it'll be "fault unknown". It's really blowing my mind. Even tried a new controller, same make and model.

Surely my control wiring isn't faulting. I look's good and it's only 10vdc.

Was thinking of wiping the slate clean and trying a Jandy SPEEDSET and new wiring. But I can't find any reviews for the SPEEDSET... anyone operating with one?